Mark Adams Posted October 23, 2015 Report Share Posted October 23, 2015 Hi, Trying to install pc link version 4.4.3 on a windows 10 laptop. keep getting an error message saying that the inf file is missing.Any ideas? thanks Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted October 23, 2015 Report Share Posted October 23, 2015 Hi Mark,sorry no I have no ideas.But why are you loading such an old firmware version.You may have to step up in firmware versions gradually and load all the way to the current 4.10.2Then upgrade the ECU's, a lot of changes since that version was around.RegardsDave. Quote Link to comment Share on other sites More sharing options...
Mark Adams Posted October 24, 2015 Author Report Share Posted October 24, 2015 to do exactly that mate, start old and update, which i have never done. but cant load software Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted October 24, 2015 Report Share Posted October 24, 2015 Hi Mark,do you have any PC LINK software installed on you laptop at all.If not then you should be able to load 4.10.2 straight up.I am unsure if the older software is compatible, I know all the latest versions work.RegardsDave Quote Link to comment Share on other sites More sharing options...
Simon Posted October 26, 2015 Report Share Posted October 26, 2015 The INF issue is with the USB drivers.You can install the old PC link fine but the USB drivers will need to be from the later versions. Quote Link to comment Share on other sites More sharing options...
JohnRambo Posted December 2, 2015 Report Share Posted December 2, 2015 I got a g4 ecu that had 4.4.3 and I upgraded it in one go to 4.10. This was a fresh install and tune with 4.10 though, I didn't use anything from 4.4.3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.