Jump to content

boost control settings

ed zahratka

Recommended Posts


The boost settings need to be tuned for your particular setup. All sorts of things can make differences which mean that someone elses boost settings will not be right for your engine. Setting up the boost control in open loop mode is not overly complicated. If you do not understand some of the settings select them in PCLink and then press the F1 key for help.

The base timing is either correct or incorrect. You need to use a timing light and compare what it is reading to what PCLink is saying the ignition angle is. If they do not match then you need to go to PCLink > ECU Settings > Triggers > Calibrate > Set Base Timing. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...