gijsje Posted January 27, 2016 Report Share Posted January 27, 2016 i now have upgarded from the G4 to the G4+ and was looking in wire in the wheel sensorsAfter looking in the help file i did find that you need to wire them to DI1 to DI6But some are already in useDI1 Power steerDI2 Start positionDI3 Vehicle speedDI4 AC requestSo in the series 1 to 6 4 are already taken by something else.Is it also posible to wire the ones already connected to another DI input? I was also looking at the wire pinouts and i could not find DI7 and DI8Where can i find them???DI1 Pin 19 main harnass (Power steer)DI2 Pin 43 main harnass (Start position)DI3 Pin 53 main harnass (Vehicle speed)DI4 Pin 46 main harnass (AC request)DI5 Expansion connector 1 pin 3DI6 Expansion connector 1 pin 4DI7 not foundDI8 not foundDI9 Expansion connector 2 pin 5DI10 Expansion connector 2 pin 6 Quote Link to comment Share on other sites More sharing options...
Simon Posted January 27, 2016 Report Share Posted January 27, 2016 Yes you can shuffle the Dis around to suit. Moving the on off type signals to higher Di channels.Di7 is on pin 54 Idle SwitchDi8 is on pin 44 Neutral switch. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.