Tommy Luhr Posted February 27, 2016 Report Share Posted February 27, 2016 Hi!I'm just bought a thunder ecu to run on my Mercedes M120.980 (6.0 liter v12).I wonder if i can run twin distributor function on this? Each bank got a own distributor with coil. Two distributors and two coils total.The firing order is alternating between cyl bank1 to cyl bank2. Is there any way to get a distributor mode that fires bank 1 coil on first cylinder (cyl1) and then fire the second coil on cylinder 12 at bank2 and then the ignition alternating between coils and banks thru a cycle.Original this engine have two seperate ignition systems. And one other thing, would be very nice with a installation manual like there used to be. Been running alot of this systems i all kinds of cars (got performance shop). There are always good to have the manual. Quote Link to comment Share on other sites More sharing options...
Simon Posted February 28, 2016 Report Share Posted February 28, 2016 HI TommyIf you set this up much like a 1UZFE Toyota (also a twin distributor V engine)In ignition mode you will need to select the twin distributor mode. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.