Jump to content

EVO9 ICS not function


Recommended Posts

First off check the inputs are set correctly, the use the test output to confirm the ECU has control (also proves wiring and the pump itself).

You may also find that Mivec isn't working. Use the runtime values window to verify.

Digital input 8 is the auto input but needs the pull up resistor to be on and set to falling edge.

if Mivec isn't working check the pull up resistor is on for digital input 1.


Link to comment
Share on other sites

If you can post your full map would be great as we will then know the firmware version and all settings. It would also be useful to know the bottom board revision, to get this you will need to look on the circuit board (the one the main header is attached to not the top board)


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...