steve_00 Posted March 21, 2016 Report Share Posted March 21, 2016 Hi,anyone can help, press ICS button no light in dashbaord and no spray water, what is the problem Quote Link to comment Share on other sites More sharing options...
Adturb Posted March 21, 2016 Report Share Posted March 21, 2016 First off check the inputs are set correctly, the use the test output to confirm the ECU has control (also proves wiring and the pump itself).You may also find that Mivec isn't working. Use the runtime values window to verify.Digital input 8 is the auto input but needs the pull up resistor to be on and set to falling edge.if Mivec isn't working check the pull up resistor is on for digital input 1. Quote Link to comment Share on other sites More sharing options...
steve_00 Posted March 22, 2016 Author Report Share Posted March 22, 2016 hi adturbhere is the setting, when press ICS button PCLINK software show ACTIVE, not water spray it out. Quote Link to comment Share on other sites More sharing options...
Simon Posted March 23, 2016 Report Share Posted March 23, 2016 If you can post your full map would be great as we will then know the firmware version and all settings. It would also be useful to know the bottom board revision, to get this you will need to look on the circuit board (the one the main header is attached to not the top board) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.