Joe Prostreet Posted June 13, 2016 Report Share Posted June 13, 2016 Hello all,Did anyone can suggest me what sensor type I've to calibrated for 1/8 BSP AIT & 1/8 BSP NTC?Can I select Std Bosch NTC with 1kOhm (Internal) Pullup Resister for both sensors? And the new Link Variohm 1000 kpa pressure sensor, Can I select 1000 kpa TI Sensor or I've to use the calibration value that printed on the sensor? Thank you very much.:-) Variohm 1000 kpa pressure sensor Quote Link to comment Share on other sites More sharing options...
Scott Posted June 14, 2016 Report Share Posted June 14, 2016 Hi Joe,Use the Delphi calibrations for the 1/8 BSP sensors. Use a custom calibration for the 0 to 10 bar sensor.Scott. Quote Link to comment Share on other sites More sharing options...
Joe Prostreet Posted June 15, 2016 Author Report Share Posted June 15, 2016 Hi Scott,thank you vary much for your help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.