Knock Sensor Logging

[Anthony Parle]

I have a G4+ Thunder, the 2 Knock sensors are wired in,

Question can I set up the ECU logging to Log these even if there not turned on in the ECU?

I am about to run the car on a dyno and want to record the Knock sensor outputs

Thanks

[Dave Kriedeman]

Hi Anthony,
sorry but I am a little confused with what you are asking here.
So you have a G4+ THUNDER ECU, you have the KNOCK SENSORS terminated but you have the KNOCK CONTROL turned OFF.
You wish to know if you can log these two parameters outputs correct.
You can select the 2 knock sensors to be logged but you will not get any data from them as they are TURNED OFF.
To log the KNOCK sensors they must be turned on and setup.
If you do not want the knock sensor to influence the tune just make sure that the KNOCK tables are set to 0.
That way you can log the knock events and have no influence on the tune.
Hope this helps.
Regards
Dave.

[Anthony Parle]

That answered may question Dave, thanks for your help.