aearch Posted April 5, 2017 Report Share Posted April 5, 2017 IM ALAN IN THE BAY AREA WITH A 74 BMW 3.0CS WITH AN M5 S38B36 FULL RACE ENGINEW/ 11:1 COMPRESSION AND WANT TO KNOW HOW TO START THE ENGINEOR WHAT MANAGEMENT SYSTEM TO BUY.AS THE SITE DOESNT SAY TOO MUCH ABOUT BMW IM NOT SURE WHAT TO DOTHE STORM SEEMS TO BE A REFERENCE BUT NOT SURE IF ITS THE RIGHT UNITCOULD USE SOME ADVICETHANK ALAN Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 5, 2017 Report Share Posted April 5, 2017 Hi Alan,That engine has E-throttle so you will need the Fury or Xtreme. If you changed to a cable throttle then the Storm would do it. Of course it will need to be wired and tuned by someone competent, I wouldnt really consider it a DIY install on an engine like this. Quote Link to comment Share on other sites More sharing options...
integrale8v Posted April 5, 2017 Report Share Posted April 5, 2017 The s38b36 (e34 m5) does not have E-throttle so the Storm is a good choice. You also need to replace the stock TPS. The stock triggerwheel/sensor (60-2) is okay to use. You also need to install a camshaft sensor if you wat to go sequential. You can use the parts from the s38b38 for camsensor install. Quote Link to comment Share on other sites More sharing options...
CamB Posted April 5, 2017 Report Share Posted April 5, 2017 Nice car, nice engine.Just to check - this is posted in the G4 not G4+ forum. A G4+ Storm has 8 injector outlets but a G4 Storm only 4. Assuming you want to go sequential, a G4+ Storm would be required. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.