mikegt4dude Posted April 30, 2017 Report Share Posted April 30, 2017 HiI have INJ8 set as starter solenoid high,Trying to figure out why I'm only getting 1v from the output and not enough to trip the relay and start the engine.Engine starts and runs if I manually bridge the power in the relay's socket.Is there a limitation that Injector channels can't be switched to 14v?Should I rewire it as a negative output, move the pin to an aux channel, or search for an error in my wiring?Thanks Mike Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 1, 2017 Report Share Posted May 1, 2017 Only aux 5-8 can do high side drive. Injector outputs are low side drive only. The high/low polarity setting only determines which level is "on"So you can move to aux 5- 8 (be aware they can only drive 0.5A high) or you can change your wiring so that the relay needs a ground signal. Quote Link to comment Share on other sites More sharing options...
mikegt4dude Posted May 1, 2017 Author Report Share Posted May 1, 2017 Thank you Adam that's a relief, been chasing my own tail on the wiring since last night from this one thing. Cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.