interprodave Posted April 30, 2017 Report Share Posted April 30, 2017 Hi , I seem to be having problems adjusting the crank trigger offset ,the set up is 36-1 trigger wheel and no cam trigger .Trigger 2 is set to "none" engine sparks and has a injector duty but wont start .Timing light is showing 110 degrees btdcIn the calibrate trigger section ,the trigger offset and the ref timing have a locked padlock which I have been unable to remove If I attempt Adjust the offset in the set basic timing section it always reverts to 0 Any advise would be greatly appreciated Cheers Dave Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 1, 2017 Report Share Posted May 1, 2017 You need to do it in the "set base timing screen" and you need to hit enter after you change the offset value. That should be all there is to it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.