bob Posted May 9, 2017 Report Share Posted May 9, 2017 On the 26th of May 2011 I had Robert from Riva Racing send me this email.---------------------------------------I just installed 4.7 and noticed that Closed Loop Idle Control was not available yet for E-throttle. Just curious, are you still testing it? Robert CrainResearch & DevelopmentRiva Racing---------------------------------------From Stephen the head engineer at the timeRay,Its almost finished, its just I don't drive the car very often so development is slow. As you know this needs to be tested on the road and not on the bench. Craig has directed me to get user CAN finished but I'll try and get a pre-release version to you before the end of the year.Stephen-----------------------------------------.From Ashley on the 19th of Spetember 2011Hi Ray, Would you be interested in testing closed loop ethrottle idle control? Trying to find as many vehicles to test it on to see if it needs more work or not.--RegardsAshley DuncanUnfortunately I did not have a car at the time that I could use to test the closed loop e-thottle.------------------------------------------22nd January 2016 I finaly had a car I could test it on and found it did not work correctly, so sent Ashley an email. This was the reply.Hi Ray,I actually don't know how that idle ethrottle control works. I haven't looked before. I did make thespeed lockout adjustable the other day and noticed that there are some conditions are 0 kph, some at 2kph, oneat 8 kph and one at 10 kph. I think the ethrottle idle control is actually not very good at all and have it athigh priority to spend some time on. Stephen did it quickly for his own car and never really finished it before leaving.Ashley DuncanEngineering Team Leader------------------------------------------As you can see from the above, the closed loop e-throttle control has never worked.I have asked many time since then forit to be fixed and nothing has been done. The closed loop e-throttle control has never worked. For six years it has not worked correctly... Quote Link to comment Share on other sites More sharing options...
Simon Posted May 9, 2017 Report Share Posted May 9, 2017 Hi RayThere have been a number of changes to the firmware since 4.7 (V series /G4 firmware)Ashley is no longer with the company so unfortunately I can't chase him.What are your complaints with it and what would you suggest is required to improve on it? Quote Link to comment Share on other sites More sharing options...
bob Posted May 10, 2017 Author Report Share Posted May 10, 2017 Simon,The problem is stalling or almost stalling.To make the closed loop work correctly I found that it hits the target rpm everytime, with zero for the PID and in the stall saver. By putting zero in the PID you are making it open loop. Add even a small amount of Proportional so the PID does something and it wants to stall. See attached logs and map.Ray.P.S. I Challange you or anyone to post their map and data loggs showing it working correctly with more then zero in the Proportional. GT86_V6_36L_ver2.pclr IdleControlClosedLoop.llg IdleControlOpenLoop.llg Quote Link to comment Share on other sites More sharing options...
Simon Posted May 15, 2017 Report Share Posted May 15, 2017 Have flicked you an email with some test Firmware. Quote Link to comment Share on other sites More sharing options...
blaine@carmenaperformance Posted June 22, 2017 Report Share Posted June 22, 2017 (edited) I have been running closed loop idle control for years on a V88 running a Ford Coyote V8. For Idle I am running 2.6 proportional at 20C and 3.2 at 100C. Never a problem with stable idle. That was from all the way back in November 2013. I have included a .llg and a .pcl This log and .pcl was during cam testing so there is only a small portion of idle at the end. At that time I was running .1 in the proprtional settings. Unfortunately I cant currently grab another log as that car was sold and the engine is currently getting swapped into another car. Blaine CarmenaCarmena PerformanceCamsworking.pcl Working Cams.llg Edited June 22, 2017 by blaine@carmenaperformance Inserted wrong file Quote Link to comment Share on other sites More sharing options...
blaine@carmenaperformance Posted June 22, 2017 Report Share Posted June 22, 2017 I have some other good logs but they all exceed max file size for upload. Quote Link to comment Share on other sites More sharing options...
Davidv Posted July 30, 2017 Report Share Posted July 30, 2017 In my case too the closed loop e-throttle does absolutely nothing to try stablise the idle. I never even thought about it until I saw this thread. Using latest firmware. Quote Link to comment Share on other sites More sharing options...
Davidv Posted September 2, 2017 Report Share Posted September 2, 2017 Okay I've tested again with proportional gain table set to zero, and now the anti stall works. You can see it spike every once in a while to maintain idle. But it would be nice if it could work to maintain idle under changing conditions as well, in my case mainly alternator load requiring more power to idle on target. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.