Euen Burke Posted May 23, 2017 Report Share Posted May 23, 2017 Currently installing a G4+ Storm on a BMW M44. The M44 has 2 knock sensors as standard. Am I correct in connecting these to pins 22 and 23 and configure AN Volt 2 as a second knock sensor. Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted May 23, 2017 Report Share Posted May 23, 2017 Knock sensors do not go to AN volt channels.Knock sensor positive leads would go to pins 8 and 9 on the B connector.The neg leads will go to pin 17 on B connector. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.