Steve Bull Posted June 20, 2017 Report Share Posted June 20, 2017 Trying to set up the injectors with the ECU. I have a set of 1050 ASNU injectors and trying to find out the nearest injectors in the pull down menu. I have the injector/voltage i think that the same as dead time on the ECU, is the nearest the Bosch 1000H.http://www.asnu.com/static-downloads/injectordata/ASNU 1050cc VC 3 BAR.pdf Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 21, 2017 Report Share Posted June 21, 2017 Set the injector type to custom then you can type your own values into the deadtime table. Fill it out to look like this below: Quote Link to comment Share on other sites More sharing options...
Steve Bull Posted June 29, 2017 Author Report Share Posted June 29, 2017 thanks for that is has made a difference.If the master fuel setting is is changed by one what is the equivalent in the main fuel or what proportional effect. Quote Link to comment Share on other sites More sharing options...
FarShark Posted April 28, 2019 Report Share Posted April 28, 2019 On 6/21/2017 at 5:31 AM, Adamw said: Set the injector type to custom then you can type your own values into the deadtime table. Fill it out to look like this below: How do you get the injector type field to show up? I do not have that option available to me at all. Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 28, 2019 Report Share Posted April 28, 2019 This is the G4 forum and the picture above is from the G4 software. It looks like your ECU is a G4+ so it wont have that setting. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.