DreXeL Posted July 10, 2017 Report Share Posted July 10, 2017 As above, I'm looking for a base map for my non-vvti 1UZ. I'll be using a MAP sensor. Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted July 10, 2017 Report Share Posted July 10, 2017 There is a base calibration in the help file for 1UZ. Even if using non-vvti, the base cal is a good starting point. You will obviously have to configure your fuel settings to work as it is intended for sequential fuel. DreXeL 1 Quote Link to comment Share on other sites More sharing options...
DreXeL Posted July 10, 2017 Author Report Share Posted July 10, 2017 Yeah, I did notice that 1UZ VVTi base map, and that was my next port of call, but was just seeing if anybody had one on the off-chance Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted July 10, 2017 Report Share Posted July 10, 2017 That is the base cal that I started to work with for my 1uz non vvti that I used in my corolla. I would offer to sell a copy of my corolla map but it will be of no use to you if you are sticking with stock inlet plenum as mine was set up with ITBs Quote Link to comment Share on other sites More sharing options...
DreXeL Posted July 10, 2017 Author Report Share Posted July 10, 2017 No worries, I've started building one from that map now, hopefully it'll get me running. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.