Smifee Posted February 7, 2018 Report Share Posted February 7, 2018 Hi just recieved my new link g4+350z ecu.. Gone threw setup.. Unlocked.. And flagging fault codes already... Gonna see a lot of questions from me i guess as i learn the ecu and software.. Fault codes flagging.. codes 10, 101, 29.. says volt 1 and 12 above expected voltage and volt 7 below.. Cars battery is on charge on a diagnostics charge/starter system... volt 1 is cruise control?? volt 12 is not listed as a pin on ecu out?? Volt 7 is aircon which isnt connected as yet so can guess thats why its flagged.. What should i check for volt 12?? Where should i look for help?? Cheers Mike.. Quote Link to comment Share on other sites More sharing options...
ClintBHP Posted February 7, 2018 Report Share Posted February 7, 2018 First thing to do it goto ECU Controls and Select Clear ECU Faults. 12 may be the EVAP Pressure Sensor (In my 350 notes it is anyway) Quote Link to comment Share on other sites More sharing options...
Smifee Posted February 17, 2018 Author Report Share Posted February 17, 2018 ok cool cheers... Where does it saythat in notes?? The bookthat comes with the ecu?? Mine only listed upto volt 11... Quote Link to comment Share on other sites More sharing options...
ClintBHP Posted February 17, 2018 Report Share Posted February 17, 2018 2 hours ago, Smifee said: ok cool cheers... Where does it saythat in notes?? The bookthat comes with the ecu?? Mine only listed upto volt 11... Its not in the Link notes, most people do away with the evap system, I found it in my own 350z notes. Quote Link to comment Share on other sites More sharing options...
AbbeyMS Posted February 19, 2018 Report Share Posted February 19, 2018 what model 350Z @Smifee do you have the Link ECU fitted to? There a few differences between different 350Z models cars that you need to be aware off. We have tuned a few VQ's with the Link fitted so can help. Quote Link to comment Share on other sites More sharing options...
Smifee Posted February 26, 2018 Author Report Share Posted February 26, 2018 Hi.. Its a early import.. on a 52 plate but seems to be a basic jdm.. Came with 17s and jdm brakes.. does this help or do i need to get more detail?? Quote Link to comment Share on other sites More sharing options...
AbbeyMS Posted February 26, 2018 Report Share Posted February 26, 2018 okay the Link PnP will work fine without any extra work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.