wael Posted March 3, 2018 Report Share Posted March 3, 2018 hi, Is it possible to wire the GM or AC DELCO 3 wire pressure sensor to link g4+ ecu? if it works, does anyone have the part number of the gm pressure sensor? Part number for ac delco sensor i found is D1846A Quote Link to comment Share on other sites More sharing options...
ClintBHP Posted March 3, 2018 Report Share Posted March 3, 2018 You can pretty much use any pressure sensor some have been pre calibrated and are in the dropdown menu and others you will need to calibrate. The Link 3 Bar calibration was in fact originally a GM type sensor so shout be spot on. Quote Link to comment Share on other sites More sharing options...
dp_tech Posted March 7, 2018 Report Share Posted March 7, 2018 Hi, You can use fuel pressure sensor from VW/Audi , this is the bosch sensor, cheap (50 usd) and very precise. p/n #06E906051K Calibration: 0 bar - 0.5V 10 bar - 4.5V Pinout: 1 - Gnd 2 - Signal 3 - 5v Adamw 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.