Rbmadhead Posted March 14, 2018 Report Share Posted March 14, 2018 Hi is it poss to put pops and bangs on a switch so can be turned on and off cheers And can I be done without a clutch switch thanks Quote Link to comment Share on other sites More sharing options...
ClintBHP Posted March 14, 2018 Report Share Posted March 14, 2018 In corrections use a 4D table enabled with the DI you wire the switch too Quote Link to comment Share on other sites More sharing options...
Rbmadhead Posted March 14, 2018 Author Report Share Posted March 14, 2018 That has completely baffled me pal I’m not clued up on mapping Quote Link to comment Share on other sites More sharing options...
ClintBHP Posted March 14, 2018 Report Share Posted March 14, 2018 Ok in which case you really need to approach a tuner, as its not as simple as turning a switch on it will need careful consideration and mapping to give reliable pops and bangs. If your in the UK I can help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.