lostsoul Posted April 1, 2018 Report Share Posted April 1, 2018 I am using this https://www.snowperformance.net/Snow-Performance-Safe-Injection-Unit-p/30020.htm to provide a Fail-Safe for my WMI system. This is what the supplier has said " the green wire will send the 12v signal when the safe injection units alarms - this will be the wire you need to connect to your ECU." I have connected to DI3 ... how do I setup DI3 so when/if there is a signal from the fail-safe unit the ecu switches to safe fuel and/or ignition maps? Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 1, 2018 Report Share Posted April 1, 2018 There are many ways you could do this. You could use the DI to switch to a lower boost table and/or turn on a 4D ignition table that removes 10deg timing. Quote Link to comment Share on other sites More sharing options...
lostsoul Posted April 2, 2018 Author Report Share Posted April 2, 2018 Thanks for that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.