Jump to content

Help.. MIL Show ( Vtec Mulfunction)


Recommended Posts

I just installing G4+ fury and i need to know How to prevent  MIL  show up on the display ( K20A EP3)
the code show VTEC Malfunction ( P1259 ) after I use Fury but after I swap back to OEM ECU everything is fine.
Any Suggestion for How to do the wiring?

Link to comment
Share on other sites

I think you will have to discuss with the installer, I suspect they have done a piggy-back install and the OEM ecu is not happy because they have disconnected the Vtec solenoid from the original ECU.  They can possibly fix it by fitting a "dummy" solenoid or resistor.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...