Kostasz33 Posted June 1, 2018 Report Share Posted June 1, 2018 Is it any way to keep and set The immobiliser on 350z pnp ecu ? Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 1, 2018 Report Share Posted June 1, 2018 It should be already set up to work correctly in our base map as far as I know. Do your settings match below? Quote Link to comment Share on other sites More sharing options...
Kostasz33 Posted June 1, 2018 Author Report Share Posted June 1, 2018 Was like that but I had to disabled to start the car. I couldn’t get any spark. Is it something else I should check? Thanks Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 1, 2018 Report Share Posted June 1, 2018 If it doesnt work with the above settings then it is not going to work sorry. Either your car does not send the "enable" message over CAN or its format or ID is different to what our firmware is set up to receive. Quote Link to comment Share on other sites More sharing options...
Kostasz33 Posted June 1, 2018 Author Report Share Posted June 1, 2018 I see. Well the car is a 2005 uk model so if anyone can help I would appreciate it. Thanks Quote Link to comment Share on other sites More sharing options...
andybp Posted June 2, 2018 Report Share Posted June 2, 2018 mine's an 03 and was the same had to disable it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.