Toliski Posted June 5, 2018 Report Share Posted June 5, 2018 Hello, I found a topic here with a Davidv's experiment, and i want to do the same. But when i try to log my Inst. fuel consuption it shows only number 0. Am i make something wrong? Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 5, 2018 Report Share Posted June 5, 2018 You will need to be using the Modelled fuel equation mode. Toliski 1 Quote Link to comment Share on other sites More sharing options...
Toliski Posted June 5, 2018 Author Report Share Posted June 5, 2018 Ok. Can you help me to set it up? Fuel system type? My 3sgte have stock FP on fuel rail. It controlled through vacuum. So i choose MAP? Base fuel pressure? At 3s forums they said base FP is about 36psi-41psi. But i have bigger fuel pump, maybe this affects my FP? Fuel Charge Coolong Coeff? What is tje proper way to calculate this? Min Effective Pulse Width? I have PL-4 1000cc injectors i found the dead times through the site of RC but they dont have the MEPW. They dont responding to my emails. Quote Link to comment Share on other sites More sharing options...
Toliski Posted June 6, 2018 Author Report Share Posted June 6, 2018 To measure my FP i must to have the key to IGN ( so the pump run with 12v ) or it must to havr 13.8v? Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 7, 2018 Report Share Posted June 7, 2018 12V with engine off will be fine for static/base pressure. Toliski 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.