delco Posted August 2, 2018 Report Share Posted August 2, 2018 Hello I will install a link g4+ in my Evo 9 this weekend with my chiptuner, and I need to keep the obd port working because I will install a 2 din radio with android to see some parameters in it. (or windows if finally it's better) The obd port will work be itself or I must connect ir to the Link g4+? What pins I must connect to the link g4+ if it's necesary? Thank you everybody Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 2, 2018 Report Share Posted August 2, 2018 You will have to wire a new OBD2 socket to one of the CAN ports on the ECU (inside case). The easiest way to do this is with a CANPCB cable and a CANF plug. Diagram below: Quote Link to comment Share on other sites More sharing options...
delco Posted August 2, 2018 Author Report Share Posted August 2, 2018 Ok, thank you very much. I have the obd2 socket, I hope the chiptuner will have the pcb cable to install all together. Or this cable it's suplied with de ecu from factory? Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 2, 2018 Report Share Posted August 2, 2018 16 minutes ago, delco said: I hope the chiptuner will have the pcb cable to install all together. Or this cable it's suplied with de ecu from factory? No the CANPCB cable is an extra accessory. He will likely have to order one or can possibly make his own depending on how clever he is. Here is what it looks like: http://dealers.linkecu.com/CANPCB_2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.