goyo Posted September 15, 2018 Report Share Posted September 15, 2018 I want to put a switch of 2 positions, to use 2 inputs and make 2 timed outputs to feed the mass of 2 relays. Do the entries have to be analog or digital? I do not know how I have to do to do timed. regards Goyo Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 15, 2018 Report Share Posted September 15, 2018 So to confirm, you have a switch with 2 positions (on/off), and you want 1 aux to turn on for a set time when the switch is switched on, then a different aux turned on for a set time when you switch off? Quote Link to comment Share on other sites More sharing options...
goyo Posted September 15, 2018 Author Report Share Posted September 15, 2018 if I have a switch on and off, when I activate the antilag that is with the same switch I activate a timed output 2 seconds and when I turn off I activate another output 2 seconds. Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 15, 2018 Report Share Posted September 15, 2018 Ok, tell us which DI the switch is connected to and which aux outputs you want to use and I will post an example tomorrow. goyo 1 Quote Link to comment Share on other sites More sharing options...
goyo Posted September 15, 2018 Author Report Share Posted September 15, 2018 the antilag is connected in DI5 and the outputs are AUX1 and AUX2 something like that I want to do Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 16, 2018 Report Share Posted September 16, 2018 Ok, set up below. Aux 1 will give a 2 second pulse when DI5 is turned on, Aux 2 will give a 2 second pulse when DI5 is switched off. Aux 2 will also give a 2 second pulse at key-on to make sure the valve? is closed. If you dont want a pulse at key-on like this then you can add a 3rd condition "RPM>500". goyo 1 Quote Link to comment Share on other sites More sharing options...
goyo Posted September 16, 2018 Author Report Share Posted September 16, 2018 Thank you very much Adamw, it is already configured and installed, and it works correctly. Next week I'll ask you to put a switch to have 2 different turbo boards. regards Goyo 20180916_133412_1.mp4 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.