cuttz Posted October 5, 2018 Report Share Posted October 5, 2018 So i have received new mxs Strada street. And installation is going well. But before I get the auto elec to finish up. I have a fuel sender question. Can we wire up the fuel sender strait to the dash to get the fuel level? Or is there another device I need? I seen a older video if the aims mxs Strada and seen they used a sender unit or something. I'm hoping there is a way to wire it up as I'm starting to run out of money but if I have to I'll buy what's needed i will Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 5, 2018 Report Share Posted October 5, 2018 You can connect the fuel level sensor direct to the dash, the only extra thing you will need is a pull up resistor and something to connect the wires. This document will help you: http://www.aim-sportline.com/download/faqs/eng/hardware/sensors/FAQ_Sensors_Fuel_level_100_eng.pdf The only thing that doesnt apply in that document is you no longer need the binder connectors as its all done via the main 23pin plug now. Quote Link to comment Share on other sites More sharing options...
cuttz Posted October 5, 2018 Author Report Share Posted October 5, 2018 awesome ill pass this on thanks in advance. cant wait to see everything thats going on now Quote Link to comment Share on other sites More sharing options...
cuttz Posted October 12, 2018 Author Report Share Posted October 12, 2018 so I am ready to set up the dash with the software but i cant find the link mxs strada dash in the can drop down menu. i have tried to update the ecu firmware but it says i have the latest version???? is there something i am missing is there a new firmware update i can not find? Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 12, 2018 Report Share Posted October 12, 2018 The mxs stream is in the 5.6.6 firmware which is not out yet. Set your ecu CAN to transmit generic dash stream. Quote Link to comment Share on other sites More sharing options...
cuttz Posted October 12, 2018 Author Report Share Posted October 12, 2018 ok thanks i didn't want to set it to that without confirmation Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.