BenjiBuilt Posted January 20, 2019 Report Posted January 20, 2019 Hey guys, Got a Barra running a Link Fury. Link Software says AFR is 13.6:1 Dash displaying 9.3:1 Difference seems to be 1.46 but Id rather correct it without using mathematic correction in the Aim dash software. Can anyone shed some light on the situation? Why would it be sending a different value? Thanks Ben Quote
Adamw Posted January 20, 2019 Report Posted January 20, 2019 Lambda 13.6? Thats an air/fuel ratio of 200:1? It sounds like you have the analog input calibration set wrong in the ECU. Quote
BenjiBuilt Posted January 20, 2019 Author Report Posted January 20, 2019 Sorry my mistake Adam, the Link is displaying AFR of 13.1:1 while the Dash is displaying 9.3:1. Was a bit loose on the terminology there sorry. Quote
Adamw Posted January 20, 2019 Report Posted January 20, 2019 Ok, 13.6:1 is 0.93 Lambda so it is just off by a factor of 10. Can you check if your dash is on the latest firmware. If it is already and still a problem then I will adjust the scaling when I set up your EGT's. Quote
BenjiBuilt Posted January 20, 2019 Author Report Posted January 20, 2019 I updated the firmware on my dash about 4 weeks ago, but when I go to download these files for you ill double check. Thankyou again! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.