banaro Posted February 3, 2019 Report Share Posted February 3, 2019 The help says that processing timer values under 50ms is unreliable, i have for example n2o injected some distance before the engine and i implement timer functions to delay the change to ign timing until the n2o reaches the cylinders and in reverse on the turn off, the calculated times are obviously way less than 50ms, so am i wasting my time doing this? Thanks for your help Quote Link to comment Share on other sites More sharing options...
banaro Posted February 4, 2019 Author Report Share Posted February 4, 2019 Adam, are you able to comment on this, if i set timer or delay functions of say 10ms, is the likely result 10 to 50ms? Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 5, 2019 Report Share Posted February 5, 2019 In the G4+, GP Outputs are evaluated every 20mS, so if you are using the timer as a GP output condition it could potentially be up to 22mS late worst case. It looks like the 50mS note in the help file was a left over from the older G4. Quote Link to comment Share on other sites More sharing options...
banaro Posted February 5, 2019 Author Report Share Posted February 5, 2019 Thanks for your help Adam, thats what i needed to know Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.