motomattx Posted March 22, 2019 Report Share Posted March 22, 2019 I have a simple question, when using the dual fuel table, is the percentage the percentage of fuel table one that will be used or the percentage of fuel table two that will be used at say a certain ethanol level. For example if I set the axis to ethanol percentage and I want to run fuel map one at 50% and up ethanol and I want to run fuel map two at 80% when ethanol content is 40% or less how would that look as far as the numbers. Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 22, 2019 Report Share Posted March 22, 2019 I cant quite understand the last bit of your question, but the "fuel table ratio table" is "percentage of table 2". So 0% in that table means it is using table 1 only (0% of table 2). 100% in there means it is only using table 2. 50% would mean it is interpolating exactly halfway between the two tables. Quote Link to comment Share on other sites More sharing options...
motomattx Posted March 22, 2019 Author Report Share Posted March 22, 2019 Gotcha, thanks for the quick reply, thats all I was wondering! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.