Mazda RX7 FD ECU Fault code 14

[DJ Boost]

I have a 1993 Mazda RX7  and I'm getting ECU fault code 14 atmospheric pressure sensor which is inside the ECU.  Anyone get this problem or know a fix.  Been googling and read that ECU needs to be replace with that code.  Going to reset ecu  it and see if it come up again.

 

Thanks

David

[Adamw]

Fault code 14 is "AN Volt 2 at ground".  AN volt 2 on our S6 ecu is the oil metering pump position.  

Do you still have the OMP fitted?  have you calibrated it per the manual?

[DJ Boost]

8 hours ago, Adamw said:

Fault code 14 is "AN Volt 2 at ground".  AN volt 2 on our S6 ecu is the oil metering pump position.  

Do you still have the OMP fitted?  have you calibrated it per the manual?

I did remove the OMP.  I turned aux 5-8 to off.  Am I missing anything else?

 

thanks for the response 

[Richard Hill]

Turn an volt 2 off, and then clear the fault code. 

[DJ Boost]

12 minutes ago, Richard Hill said:

Turn an volt 2 off, and then clear the fault code. 

 I am working right now and I can’t remember off the top of my head where that is at in the settings

[DJ Boost]

On 4/4/2019 at 9:53 AM, DJ Boost said:

 I am working right now and I can’t remember off the top of my head where that is at in the settings

That was it!! Much appreciate it!!  Thanks