MapperMapper Posted April 27, 2019 Report Share Posted April 27, 2019 Hi guys, couple of queries on an aim mxs strada dash linked to a g4+. All works great apart from afr displays totally different to what the ecu is actually reading, using can lambda. Also is there a way to transmit info to the dash regarding boost table? Hi and low boost are switched via a DI and would like to send the info to the dash so I can use it to maybe alter the boost digits to a different colour for high boost. Cheers in advance Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 28, 2019 Report Share Posted April 28, 2019 18 hours ago, MapperMapper said: All works great apart from afr displays totally different to what the ecu is actually reading, using can lambda. Are you using ECU firmware 5.6.6 and the "Transmit Link AIM MXS Strada" CAN mode? Quote Link to comment Share on other sites More sharing options...
MapperMapper Posted April 28, 2019 Author Report Share Posted April 28, 2019 I will check on which firmware it's on, was last updated maybe 8 months ago at a guess. I'm using transmit generic dash as I don't recall seeing there being an mxs specific one there, so perhaps we are behind on firmware? Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 29, 2019 Report Share Posted April 29, 2019 In ECU firmware 5.6.6 we added a MXS specific dash stream which fixed the lambda scaling (basically it was off by a factor of ten). Another option is just to use a math channel in the dash to multiply by ten. If you email me your ecu and dash configs I can set up the boost status when I get a quiet patch. [email protected] Quote Link to comment Share on other sites More sharing options...
MapperMapper Posted April 29, 2019 Author Report Share Posted April 29, 2019 2 hours ago, Adamw said: In ECU firmware 5.6.6 we added a MXS specific dash stream which fixed the lambda scaling (basically it was off by a factor of ten). Another option is just to use a math channel in the dash to multiply by ten. If you email me your ecu and dash configs I can set up the boost status when I get a quiet patch. [email protected] Awesome, i will get the car back in soon and shoot them both over to you, thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.