dx4picco Posted May 21, 2019 Report Share Posted May 21, 2019 Hello dear Link comunity, I own a 1998 (v4) sti type R on which I am looking for a tunable ecu. The link WRX4+ seems to be the indicated ecu to start with. However I have a question regarding avcs control. I am aware that the ej20k in the car has no variable cams timimg, but I planed to swap it for a more recent jdm engine that has avcs. Reading product description here (dealers.linkecu.com/WRX4Plus) It seems the ecu has this option : "Variable Valve Timing (where applicable) Up to 4 channel independent Precision Closed Loop Control 3D Tables with configurable X and Y axis controls Preset or Custom Configuration Supported Engines - 1UZFE VVTi; Subaru AVCS" My question is : is it possible to control avcs with this ecu, and if yes what would be the steps to follow ? Xs loom ? Soldering on the ecu to get the inputs and outputs required ? Directly through pins of the 3 ecu plugs ? Thanks ! Best regards Quote Link to comment Share on other sites More sharing options...
Simon Posted May 21, 2019 Report Share Posted May 21, 2019 It can be done. Assuming intake only being variable you will need 2 Dis for position signals and 2 Aux outputs for the solenoid control. Adding an XS loom often makes this easier as you can then move existing functions to the XS loom and free up the required channels on the main header. Regards Simon Quote Link to comment Share on other sites More sharing options...
dx4picco Posted May 22, 2019 Author Report Share Posted May 22, 2019 Great thank you for the confirmation. If enough input and output are freed up, is quad avcs possible too on that ecu, or is only intake possible (assuming engine comes from v10 car) ? Have a nice day Quote Link to comment Share on other sites More sharing options...
Simon Posted May 23, 2019 Report Share Posted May 23, 2019 Quad is an option but think you would be struggling to have the I/O available. Quote Link to comment Share on other sites More sharing options...
dx4picco Posted May 23, 2019 Author Report Share Posted May 23, 2019 Thank you for the answer. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.