jonas Posted July 11, 2016 Report Share Posted July 11, 2016 Firmware update from 4.7.0 to 4.10.2, it will be any problem to do that? Is there something you should consider before you do it? Quote Link to comment Share on other sites More sharing options...
Scott Posted July 12, 2016 Report Share Posted July 12, 2016 Hi Jonas,No known issues with this, however quite a few changes so be sure to read the release notes well.Scott Quote Link to comment Share on other sites More sharing options...
jonas Posted July 14, 2016 Author Report Share Posted July 14, 2016 If there are problems with the new firmware. it is possible to reverse to an older firmware? Quote Link to comment Share on other sites More sharing options...
Simon Posted July 15, 2016 Report Share Posted July 15, 2016 Yep you can roll back if you wish. Quote Link to comment Share on other sites More sharing options...
jonas Posted November 2, 2016 Author Report Share Posted November 2, 2016 Hi, When I updated the firmware wear so I got up an error message that it was canceled.now it will not update .How should I do to make it work? Quote Link to comment Share on other sites More sharing options...
Simon Posted November 2, 2016 Report Share Posted November 2, 2016 Hi Make sure you have no device connected to the Serial / CAN port of the ECU.Also set the PC Link to manual connection. (This can happen if PC link is on auto connect and tries to connect during the upgrade.)Now try to rerun the firmware upgrade and all should go correctly. Quote Link to comment Share on other sites More sharing options...
jonas Posted November 3, 2016 Author Report Share Posted November 3, 2016 Thanks for the help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.