Rbmadhead Posted August 26, 2016 Report Share Posted August 26, 2016 hi been told u can put a switch for launch controll 10way so can alter it by 200 rpm at a time what is the best switch to buy as wanting to fit it in a custom panel before I take it to be mapped any help be apreciated davidbek95 1 Quote Link to comment Share on other sites More sharing options...
Scott Posted August 29, 2016 Report Share Posted August 29, 2016 You will basically be wanting a potentiometer that might have indenting so that each position is stable and the output is always the same. I don't have any particular recommendation, maybe someone else will, I think they are called 'detents' or 'rotary switches'. You will connect the output of the switch (potentiometer) to one of the ECU's AN volt channels. You can then span the AN Volt channel as an axis on the launch control table.Scott. Quote Link to comment Share on other sites More sharing options...
PJM Posted November 9, 2016 Report Share Posted November 9, 2016 Hi, if you have not sorted this I actually made a switch to do this although it was a 6 position switch and setup to jump 500rpm per click, its a little more complex than a potentiometer but I should be able to make another one if you still need one. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.