StijnFSP Posted November 3, 2017 Report Share Posted November 3, 2017 hi , ive installed a tt link on a 2003 engine but this engine has VVT how do i control that ? and does the ecu reads the oem wideband lambda? also the idle does sometimes bounce and stalls on idle whats the easiest way to calibrate the drive by wire throttle . ? thnx . Quote Link to comment Share on other sites More sharing options...
StijnFSP Posted November 3, 2017 Author Report Share Posted November 3, 2017 because on aux fuel 6 i cant select VVT solenoid . and acoording to the manual its on that pin Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 4, 2017 Report Share Posted November 4, 2017 This is not a car I know a lot about but from the info I have it seems those that had "VVT" it was just an on/off type system - not proper continuously variable cam position control. So the function you want for inj 6 would be "CAM Switched". Quote Link to comment Share on other sites More sharing options...
StijnFSP Posted November 6, 2017 Author Report Share Posted November 6, 2017 i checked in oem software and oem its on off during warum going to play with it with the link to see if i can make better spool . but in oem software u can change the way it works that its closed loop cam control but i'm just going to try with the on off type .cam switched . also about the wideband it doesnt read it i supose ? thnx for the reply Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 7, 2017 Report Share Posted November 7, 2017 15 hours ago, StijnDvx said: also about the wideband it doesnt read it i supose ? No sorry our TT plugin doesnot have onboard wideband sensor controllers. Quote Link to comment Share on other sites More sharing options...
StijnFSP Posted November 7, 2017 Author Report Share Posted November 7, 2017 thnx for the reply i already redid the wirring to a narrowband . Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted November 7, 2017 Report Share Posted November 7, 2017 For tuning purposes, I would highly recommend adding a wideband controller such as the link Can Lambda unit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.