Jump to content
jameswwt

Basic Preconfigured required to get my Jdm S15 Sr20Det Start

Recommended Posts

Hi Brad, thanks for your kind advise but ive tried saving the base map into the ecu but it still wont start. 

Im hope someone could kind enough to email me a preconfigure map which i could start my jdm  S15 sr20det engine.

Thank you  

Share this post


Link to post
Share on other sites

Have you configured the jumpers and dip switches for the right model and year?

Do you have RPM displaying in software when cranking?

Do you have spark?

Have you checked ignition timing?

Share this post


Link to post
Share on other sites

Hi Adam, ive finally got the car started.
My other question are :
1- Is the based map close loop is presetted OFF?

2- How could i increase/set RPM Limit MAP Limit? Can i set the Map Limit to 100 from 6000 to 8000 RPM? Does it mean after the setting, the Boost will not exceed 100kpa from 6000 to 8500RPM?

3- When Knock occurred, will the ecu auto retard? Which is the Knock Setup should i chose and what is the common and safe for Freq Channel? Should i set the Knock Control off?

Blessings

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...