Kimple Fi Posted March 28, 2018 Report Share Posted March 28, 2018 Hi guys ! Which pin must connect to the Launc Control , Altezza plug in g4+ ? Sorry my English Kimmo Quote Link to comment Share on other sites More sharing options...
Simon Posted March 28, 2018 Report Share Posted March 28, 2018 It will depend on what Digital inputs you have in use. You need a free Di and wire a switch to this. The XS loom will have a couple or you might like to use say the AC request if it is not in use for AC as an example. Quote Link to comment Share on other sites More sharing options...
Kimple Fi Posted March 29, 2018 Author Report Share Posted March 29, 2018 Ok Thanks Simon ! Can I use "vehicle speed input" (DI 3) for example, because this is left unused in my assembly ? Kimmo Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 29, 2018 Report Share Posted March 29, 2018 Yep, DI3 will be fine or you could also use DI6 which was originally brake pedal switch - it is not really used for any ecu functions Quote Link to comment Share on other sites More sharing options...
Kimple Fi Posted March 29, 2018 Author Report Share Posted March 29, 2018 Ok Thanks to you Adam Kimmo Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.