Grant Baker Posted April 20, 2018 Report Share Posted April 20, 2018 Hi Setting up a CAN Keypad at the moment via a MoTeC PDM to control functions on a Link Fury. Setting up traction control seems to be a slight issue as the TC needs a TC Disable switch, but can't assign a CAN DI to a TC Disable function? Any ideas? Quote Link to comment Share on other sites More sharing options...
Grant Baker Posted April 20, 2018 Author Report Share Posted April 20, 2018 Just found the solution: Receive the following: Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 20, 2018 Report Share Posted April 20, 2018 Close but your screenshot shows the transmit parameter, change your filter to receive and use the same parameter: Quote Link to comment Share on other sites More sharing options...
Grant Baker Posted April 20, 2018 Author Report Share Posted April 20, 2018 Thanks Adam Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.