Jump to content

TR.

Members
 View Profile  See their activity

  • Posts

    6

  • Joined

  • Last visited

Reputation Activity

  1. Like
    TR.
    TR. reacted to Adamw in TPS in ECU Display screen   
    TPS can work either way around - voltage rising or falling with opening.  If moving voltage is showing on the analog input raw voltage but the TPS runtime is not moving then there is something wrong with your software setup.  Can you attach your tune and a short PC log of a couple of pedal movements.  
  2. Like
    TR.
    TR. reacted to Confused in TPS in ECU Display screen   
    Are you sure you haven't reversed the pinout - some diagrams specify it looking into the harness connector, some specify it looking into the sensor itself.
  3. Like
    TR.
    TR. reacted to Brad Burnett in TPS in ECU Display screen   
    Sounds like the pinout at the tps connector is wrong.
    If you look in the Analogue Voltages tab in the runtime value list(F12 or r), do you have any voltage on the ANVolt channel the tps is connected to?
  4. Like
    TR.
    TR. reacted to Adamw in Help with Ecumaster PMU + Keypad setup   
    Fuel pump and fan are sent as virtual aux 1 & 2.  This means all fuel pump and fan logic is done is ECU (prime, temperature settings etc). You probably dont need RPM and ECT sent to PDM but I have added them anyway.
    I also set up as an example a "High boost" button on the keypad, this is sent to the ecu and changes the boost table. 
     
     I have set the ecu to transmit the generic dash stream.  In the ADU project tree you just need to go >add>import CANx file, then choose the Link ECU generic dash file.  Make sure the Dash CAN is set to 500K to match everything else.
    BMWM3Turbo CAN PDM.pclr Example.pmu
×
×
  • Create New...