Godschylde777
-
Posts
7 -
Joined
-
Last visited
Reputation Activity
-
Godschylde777 reacted to JMP in Wiring Questions for Gracey
Nitrous activation would likely go to one of the DI inputs, pressure switch could go to a spare DI or Volt input, all depends on what you have spare in your ECU configuration
If you're connecting the innovate analogue output to the ECU, you would use one of the spare Volt inputs
-
Godschylde777 reacted to Adamw in CAN to Dash on a plug in
You will only have two wires soldered into the CANF plug as per the pic above, CAN H & CAN L. It will then not interrupt PC communication.
-
Godschylde777 reacted to Richard Hill in CAN to Dash on a plug in
At the ECU end, white is can high or +, green is can low or -, connect these to the corresponding white CAN1+, and blue CAN1- at the dash end.
HTH,
Richard.