Chipsminor

Hello Again! We did some tests with another set of Coils and still does the same thing! I did 3 trigger Scopes at 3 different Speeds over 5000RPM and i think i captured the problem at the trigger scope no.3 Also Just to give some hint. The Car Does the problem also more on lower gears and on clutch kicks too! Thank You!

The CAS is new. Also Timing belt is tight. We replaced 3 stock trigger sensors and the we put this in the photo. I will post tonight my friend!

Hello, We have a Nissan Skyline R33 with an RB26 engine and we have a really Strange Problem! It has a G4+ Plugin Link installed .The Car Hits the Rev Limiter Early! Sometimes at 5000Rpm and Sometimes at 6800. The Rev Limiter is set to 7200 without the advanced tables. We Swapped the whole Wiring with a Mil-spec one, we have Replaced the Trigger Setup with a 24 Missing 1 tooth and a Reluctor Sensor, We messed with the Filtering and the Arm threshold Setup, and now we are going to Replace The coils for Test! Anyone who have any Similar Issue or may know anything? I attached 3 Log Files i Recorded (I can send with more details if you need) and also i attached a photo where the limiter "hit" at 13500RPM but the car never passed the 6800 actually. Thank you for your time! Log Skyline.llg Log 2021-01-7 6;20;30 pm.llg Log 2021-01-7 6;21;13 pm.llg

Here it is the trigger scope

The coils have 12Volts also the injectors! When i crank the car they still show as OFF. I will check test mode and let you know. I forgot to upload the scope! I will tonight!

Hello my friend @ykchong4 can i have your trigger settings please? I try to start a suzuki ignis with the same settings and i also have inverted cam trigger pulse! Any help will be appreciated! Thank you

Hello, I installed a link g4 storm on a suzuki ignis with m15a engine and K20 Coils. This engine has 36-2-2-2 Crank trigger wheel and a 2-2-1-1 Cam Sync Wheel. I am Trying to start up the car but fuel injectors and ignition Coils are not triggering.I discovered that my cam pulse is inverted! I have read an article here for the same engine but no luck. Could Anyone Please help me? Its my first touch on a link ecu, so i am sorry for any stupid mistakes ! I will attach my map file and a log file of cranking the car! Thank You! Easy.llg Bouzouki.pclr