kiwi-racer

Hey Confused, thanks for the quick reply ! Im just trying to get the TPS Setup to run on this. I have the throttle relay set to internal, Im using Aux 9/10 for my PWM I can move the Throttle blade and see the TPS work.. I did set run when stalled, throttle target table is set (im using the starter tune for a LS3) so lots of that default stuff is here. humm, is there a way to force a voltage on a pin, eg: force my ethrottle PWM to run in a test mode so I can watch it with a volt meter

Hi, new to Link, got my G5 harness finished, troubleshooting that my Throttle is not moving, no TPS I want to validate that Pin A-5 is 12V Pin A-6 has voltage for ON Pin B-5 Ethrottle Power is 12V I looked at the realtime screens, etc, but I don't see these "internal pins" thanks

@Vaughan - it appears to be working directly from the help file, thank you

Awesome, thank you !

Hi, what's the name/spec of the CAN1 plug on the G5 ? is it a LTW 6Pin ? - On the Link Website it lists Compatible ECU's: G4X/G4+ Xtreme (CAN1) G4X/G4+ Fury (CAN1) G4+ Force (CAN1) G4+ Thunder (CAN1) Is the G5 the same LTW 6Pin Plug Spec ? Is it this plug ? https://www.newark.com/amphenol-ltw/cb-06bffa-ql8sp0/middle-assy-x-lok-10a-f-conn-f/dp/22AC8023

I forgot to mention it's not there either

Hi, anyone know where I can get this documentation file from ? - Im on the latest Link Version

This is very very cool, Im planning on doing the same thing very soon. Interesting observation on the sensor performance impacting the responsiveness.

Ok, Awesome, first time with this type of direct O2 sensor integration, thanks for the advice !

They are directly connected to the ECU no 3rd party wideband controller. But I need calibration that maps the voltages to the values.

Hi, with my sexy new G5, LS3 Engine, we wired up dual connections 4.9 on Plug E for the Bosch 4.9 Wideband Sensors, Can I use the AEM X Series Calibration, as I believe they all use that Sensor ?, or is that scaled differently as the signal comes from the AEM box ? Here's the cross reference on who uses these sensors Bosch Part Number: 0 258 017 025 ( 0258017025 ) Bosch USA Part Number: 17025 AEM Part Number: 30-2004 AiM Part Number: X05LSU490 AiM Part Number: MC-330 MSD part number MSD 2267 for POWER GRID WIDEBAND MODULE 7765 thanks !

Hey, I just got my G5, plan to complete the migration of my harness from E67 to G5 this week. I am new to Link.. been following the Link LS harness pinout from those instructions/readme's and plan on using the "GM LSx Gen4 DBW Xtreme base map.pclx" file as my base tune to start the car. Once I get firmware updated on the G5, can I open the Xtreme Base file and transmit it to the G5 ?, and will my software automatically add the extra values that my ECU supports (eg: E Harness Plug Pins, GPS, etc). Then close the config file, connect to the ECU and download my new base tune with the G5 attributes ? Or is there some other way to do this ? Thanks !

Yes, It's not fully supported, but I have been running PC Link 7.x for G5 very successfully on a Mac with Windows 11 ARM. I use it to build tunes and go over logs after hours and it's been great. With 7.2.2 now I just ran the install and I get a issue, see attached.. Did you guys update the MSI installer to something new or change an flag on what to include in your installer package ?.. Can you please fix this in the next build :-( Appreciate it !

Sorry about that, I got confused. That Installer table spreadsheet is exactly what I needed, thank you

Hey Richard, I think we are missing the link to the spreadsheet you mention, I don't suppose you can share an updated link. I am looking for a spreadsheet to use as a starting point that shows the A & B standard pinouts that I can edit for my build.. (and add a E Plug as Im using a G5)

Hey Guys, Im moving to a Link ECU for my race car. Currently all my sensors / etc are CAN bus based (O2, Keypads, AIM Dash, TPMS, MK60 ABS).. I would love to be able to import the DBC files I have for these devices, setting them up manually is going to be a major pain, and Im sure I will make many errors.. Im only Human :-) Does anyone have the DBC files for the Transmit XYZ Dash's (Link's CAN Setup/User Defined LCS files), so I can use it as a starting point with my editor (CanDB ++) and add the additional Channels I need, like Wheel Speeds (traction control), Publish Fault Codes, etc. Also, What format are the .LCS files, they appear to be binary.. Thanks !

THANK YOU, this looks super helpful, I really appreciate it One question, are you using the wheel speed sensors for traction control ?

Hi Guys, Im building a similar LS1 powered track car (with the MK60 ABS) - it's a E46 with a LS1. Do you mind sharing your LS3 tune @Adamw - that will really help me with things like DBW settings, knock settings, etc.. Im a Haltech/HPT guy. Cheers

Hey @Beedub Drift - I need the same thing, did you find a tune ? (or make one !) Cheers