Clattie

Damn, thanks for the help!

Sorted! What does 'GP' stand for exactly? And is there anyway to rid of the 'GP Temperature 1' before my custom label for easier viewing?

How would i go about setting up a water temp sensor that's positioned in my charge cooler? There is no function related to charge cooler water temperature so id assume i need to somehow name a custom function and select that in AN temp 4. How do i go about doing it?

What do you mean by rpm at zero again above my maximum value? I've set my aps to 100% at 100, would I also have to add in 90%,80%,70% and so on to make it linear?

Is there a proper guide for setting E-throttle up? the link help guide doesn't mention much. What would be a reasonable value for both idle and e-throttle targets? I'm running a Gen 3 3SGTE. I've added the updated log file down below, which includes calibration and throttle input. I'm assuming the fault is the target tables as i've not set these up. I just want to run a 1:1 ratio as if it was cable driven. PC Datalog - 2023-02-13 1;57;49 pm.llgx

So all that is now working, problem now is that when the throttle mode is set to 'ON' the flap doesn't open and close with the pedal. My APS values and perfectly fine but the TPS values don't change. Any idea? PC Datalog - 2023-02-13 1;57;49 pm.llgx

Cheers adam, i just assumed i could load in my inputs/outputs and the software would do the rest. I'll give it ago first thing and hopefully its all corrected. Cheers!

Hi guys, I've been trying to setup my ECU before Pre-start but i'm some issues! I can't calibrate my tps as i'm guessing faults,although my aps is fine and my values change with pedal movements, i've also got a fault code for multiple Analog channels and Oil Temperature. Any idea why? PC Datalog - 2023-02-12 7;50;55 pm.llgx