Matthew Ball

Yeah ok fair enough just thought I'd check with you 😉

Hey there trying to set up a coolant pressure sensor its calibration is -14.7 0.5v 35psi 4.5v when trying to set up a gauge on screen I only have pressure to choose from how do I make it read negative pressure

Ok thanks I'll get back to you

Yeah the description s are to brief to make enough sense unfortunately 😞 all it should say is this setting adjusts this an that so it's user friendly

could i please get a quick rundown of what all the settings do to the throttle system it would be appreciated

Every thing should be sweet then thankyou

Oh didn't know that I am probably going to have to run it like that as it's the only way it will fit My duty cycle is at 90 and -90 I tried changing the -side didn't seem to change the throttle position

Thanks for the comment

yes i found the run throttle and quiet throttle settings an i get that what i meant to say is my target throttle idle target table is at zero for rpm and the temp that it reads didnt know why it still cracks open the throttle plate off the park position about a millimetre or 2 i thought the throttlebody would be quiet if it stayed fully closed as i thought the motors in the throttlebody would not have to be working i am new to dbw so im just trying to find that out

hey there first time on the forum i just installed my dbw does the throttle body supposed to make noise at closed throttle not sure about the settings it opens the throttle body just a slight bit and makes noise with no pedal given when dbw is turned on i could do with some pointers on setting this up its a g4x plug in with external module Bosch 60mm and bosch pedal on a rb25det matts car 4.pclx