littlefeck Posted July 1, 2019 Report Share Posted July 1, 2019 I am currently using a link xtreme ecu in a Mazda RX8, I have set up CAN 2 to talk to the existing car network in place of the factory ECU. Is it possible to send/receive more than 6 channels or is it possible to send multiple CAN IDs from one stream? Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 2, 2019 Report Share Posted July 2, 2019 You can connect CAN 1 to the same bus and that will give you another 6 ID's. That will add another termination resistor into the bus but I have done it a couple of times and it worked ok. Quote Link to comment Share on other sites More sharing options...
Benginetuner Posted August 26, 2019 Report Share Posted August 26, 2019 On 7/1/2019 at 2:01 PM, littlefeck said: I am currently using a link xtreme ecu in a Mazda RX8, I have set up CAN 2 to talk to the existing car network in place of the factory ECU. Is it possible to send/receive more than 6 channels or is it possible to send multiple CAN IDs from one stream? Sorry to open an old post up, littlefeck did you use the link to control the factory PAS ecu? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.