wanchai Posted July 3, 2019 Report Share Posted July 3, 2019 Magnus motorsport launch control device. I want this device to be active only at 1st gear,and I have only aux output left. How should setting look like on aux output on v44? Thank for your time /wanchai ppfhonda2019medtändback.pcl Quote Link to comment Share on other sites More sharing options...
1320MINI Posted July 3, 2019 Report Share Posted July 3, 2019 If you have non driven wheel speed you could work out how fast 1st gear will take you then set up a virtual AUX to turn on up to a certain MPH while TP is over certain amount. Quote Link to comment Share on other sites More sharing options...
wanchai Posted July 4, 2019 Author Report Share Posted July 4, 2019 yes i have non driven speed on digital 4 output.And gear detection is on,also speed wired to digital 3 how should setup looks like? Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 5, 2019 Report Share Posted July 5, 2019 You would be best to use speed as gear detection cant work when the car is not moving or the clutch is slipping. Set up like below. You may also need to add a second condition such as "RPM >5000" so that it doesnt turn on when you are driving around on the road sedately but try just with speed initially as it will probably be ok. Quote Link to comment Share on other sites More sharing options...
wanchai Posted July 7, 2019 Author Report Share Posted July 7, 2019 Thank Adam Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.