Jump to content

Lambda 1 figure on display

George GEP

Recommended Posts

  • 4 months later...
On 9/9/2019 at 11:30 PM, Adamw said:

The CAN and dash work in Lambda.  So it should show 1.2Lambda, not 12.  Are you using generic dash stream or the MXS stream?  MXS stream should work correctly.

It is selected “Transmit DISPLAY LInk” there is no mxs in Mode list.

Link to comment
Share on other sites

It sounds like your ecu must be on old firmware if you dont see a "Link AIM MXS Strada" stream, you should be using this.



21 hours ago, George GEP said:

also need help how to wire and setup fuel level sensor to ECU or to display directly? any instructions?

Wire it direct to dash.  Instructions here:  https://www.aim-sportline.com/download/faqs/eng/hardware/sensors/FAQ_Sensors_Fuel_level_100_eng.pdf

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...