George GEP Posted September 9, 2019 Report Share Posted September 9, 2019 Hello link display shows different Lambda 1 figures than i see on laptop in pclink why is it so and how can i adjust? Link display shows 12afr pclink shows 18afr Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 9, 2019 Report Share Posted September 9, 2019 The CAN and dash work in Lambda. So it should show 1.2Lambda, not 12. Are you using generic dash stream or the MXS stream? MXS stream should work correctly. Quote Link to comment Share on other sites More sharing options...
George GEP Posted January 26, 2020 Author Report Share Posted January 26, 2020 On 9/9/2019 at 11:30 PM, Adamw said: The CAN and dash work in Lambda. So it should show 1.2Lambda, not 12. Are you using generic dash stream or the MXS stream? MXS stream should work correctly. It is selected “Transmit DISPLAY LInk” there is no mxs in Mode list. Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 26, 2020 Report Share Posted January 26, 2020 What dash do you have? An old G4 DisplayLink like below? What ecu do you have? Quote Link to comment Share on other sites More sharing options...
George GEP Posted January 31, 2020 Author Report Share Posted January 31, 2020 Dash is Latest one. LINK MXS - Race Edition Xtreme G4+ ecu. also need help how to wire and setup fuel level sensor to ECU or to display directly? any instructions? Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 1, 2020 Report Share Posted February 1, 2020 It sounds like your ecu must be on old firmware if you dont see a "Link AIM MXS Strada" stream, you should be using this. 21 hours ago, George GEP said: also need help how to wire and setup fuel level sensor to ECU or to display directly? any instructions? Wire it direct to dash. Instructions here: https://www.aim-sportline.com/download/faqs/eng/hardware/sensors/FAQ_Sensors_Fuel_level_100_eng.pdf Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.