ABS check light ON after share wheel signal

[Invecii]

Hi 

There are 2 wires come from my ABS sensor (GND and Signal)，I want to share the wheel signal to my Link G4+ Digital input but after I share ABS signal to Link G4+ the ABS check light is ON.

I set the pull-up resistor ON in the Wheel speed function but nothing help.

Does  anyone can help me to solve ABS check light problem?

Thanks.

[Simon]

Pullup should be off as it is a VR sensor. 

However you might still have issues depending on how the ABS is using the sensor. 

[Invecii]

Thanks Simon.

I will try it and hope everything goes well.