Focos wrc Posted September 28, 2019 Report Share Posted September 28, 2019 Hi I have a fury on order along with a aim strada 1.2. Will I be able to use the toucan along with the strada on the ECU ok? I see it has 2 x canbus so have assumed it would. Many thanks (Will prob need assistance once it arrives getting it all to work) Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 28, 2019 Report Share Posted September 28, 2019 Yes, you can just connect them both to the same CAN bus. Both use the same 1Mbit speed by default, AIM use a CAN ID of 1000 by default and the Toucan uses 1500 & 1501 by default so they will be all be happy together. Focos wrc 1 Quote Link to comment Share on other sites More sharing options...
Focos wrc Posted September 28, 2019 Author Report Share Posted September 28, 2019 Perfect. Thank you. Once it all arrives I am sure I will have more questions. Quote Link to comment Share on other sites More sharing options...
Focos wrc Posted October 8, 2019 Author Report Share Posted October 8, 2019 Well all bits have arrived other than my loom at present Just few more questions about above I plan to wire the aim dash to can2 connections. How would I connect the toucan and be able to have the control via it without causing other issues. Read about problems having the 6 pin plug connected for the toucan and trying to use tuning cable at same time.... Is there a way to connect the toucan hard wired and still be able to use all its functions? Many thanks again Quote Link to comment Share on other sites More sharing options...
Simon Posted October 9, 2019 Report Share Posted October 9, 2019 The coms issues come about when the TX and RX for the serial coms are connected to unused wires. If you wire in to the ECU on CAN 1 then use a CANF connector to wire to and only use CAN L and H and you will be fine. On CAN 2 there is no risk at all to effecting the USB coms. Quote Link to comment Share on other sites More sharing options...
Focos wrc Posted October 9, 2019 Author Report Share Posted October 9, 2019 Brilliant Thanks for the info Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.