Fotis Posted October 25, 2019 Report Posted October 25, 2019 Hi everyone i was tuning a customer car( EVOLUTION 7 ) today. For some reason trigger 2 was set to Rising instead of Falling but it worked normal with no trigger counter errors . Which one should i use and which is the correct ? Thanks Quote
Adamw Posted October 25, 2019 Report Posted October 25, 2019 Im pretty sure in the Evo trigger modes the sync edge polarities are hard coded, so it should work fine either way. Trigger 1 actually uses both the rising an falling edges to effectively give you 4 teeth instead of two. Fotis 1 Quote
Fotis Posted October 25, 2019 Author Report Posted October 25, 2019 Hi Adam, So it will be okay if i leave it as it is, at rising instead of falling for trig 2? Engine Rpm is very smooth, Roc is good too. Quote
Adamw Posted October 26, 2019 Report Posted October 26, 2019 Yeah it should be fine to leave as is. Obviously it probably hasnt been thoroughly tested/proven with the "wrong" settings but in theory it should make no difference. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.